Regulation of the antibiotic elution profile from tricalcium phosphate bone cement by addition of bioactive glass.

This work aimed at tailoring of different properties of antibacterial drug delivery Ca-phosphate cements by incorporation of bioactive glass (BG). The cements were prepared from beta-tricalcium phosphate cement (ß-TCP) and BG based on 50 SiO2-20 CaO-15 Na2O-7 B2O3-4 P2O5-4 Al2O3 wt% with different percentages of BG [5, 10, 15, and 20% (w/w)]. The composite cements were characterized by XRD, FTIR, and TEM. Moreover, in vitro bioactivity and biodegradation were evaluated in the simulated body fluid (SBF) at 37 °C. In addition, physical properties and mechanical strength were determined. Also, the effect of glass addition on the drug release profile was examined using gentamicin. Finally, the antimicrobial activity was studied against Staphylococcus aureus, Pseudomonas aeruginosa, and Klebsiella pneumonia bacteria, one unicellular fungal strain (Candida albicans), and one multicellular fungal strain (Mucor racemosus). The results showed that after soaking in SBF, the compression strength values ranged from 14 to 36 MPa, the bulk densities and porosities were within 1.35 to 1.49 g/cm3 and 51.3 to 44.71%, respectively. Furthermore, gentamicin was released in a sustained manner, and BG decreased the released drug amount from ~ 80% (in pure ß-TCP) to 47-53% in the composite cements. A drug release profile that is sustained by all samples was achieved. The antimicrobial test showed good activity of gentamicin-conjugated cements against bacteria and fungi used in this study. Additionally, cytotoxicity results proved that all samples were safe on MG-63 cells up to 50 µg/mL with no more than 7-12% dead cells. From the view of the physico-mechanical properties, bioactivity, biodegradation, and drug release rate, 20BG/ß-TCP sample was nominated for practical bone grafting material, where it showed appropriate setting time and a relatively high mechanical strength suitable for cancellous bone.

Incorporation of strontium borosilicate bioactive glass in calcium aluminate biocement: Physicomechanical, bioactivity and antimicrobial properties.

Strontium borosilicate bioactive glass (SrBG) and calcium aluminate cement (CA) composites have been synthesized. The primary goal of this work is to evaluate how SrBG affects the bioactivity and physico-mechanical characteristics of CA. To fulfill this aim, SrBG was prepared by melt-quenching method and utilized as a substitute for CA by 5, 10, 15, and 20 wt%. To estimate the biological behavior of the prepared specimens, hydrᴏxyapatite layer (HA) establishment on the surface of cement paste was followed; after their immersion in a solution resembles human blood plasma (simulated body fluid solution (SBF)) at a temperature of about37 ± 0.5 °C for 4 weeks. The variations of pH, Ca and P ions concentrations in the SBF solution after soaking were determined. Compressive strength, apparent porosity, and bulk density were also measured. Via Fourier transform IR spectroscopy and X-ray diffraction analyses, the main components had been analyzed. Using scanning electron microscope (SEM) attached to energy dispersive spectroscopy, morphology of the samples was investigated. Additionally, the antimicrobial property was also assessed. The results proved that the hydrᴏxyapatite layer (HA) was developed on the surface of the prepared samples after soaking in the biological solution (SBF). It was also found that increasing SrBG percent in synthesized samples promotes the physico-mechanical characteristics and also the bioactivity performance of CA cement. Finally, these materials also showed good inhibition behavior towards bacterial biᴏfilms, against S. aureus and E. coli. after 48h. This makes these materials excellent candidates for preventing growth of bacteria after their implantation in teeth or bone.

Physico-mechanical characteristics of tri-calcium silicate pastes as dentin substitute and interface analysis in class II cavities: effect of CaCl2 and SBF solutions.

The influence of using simulated body fluid (SBF) as a curing medium on some characteristics of pure single tri-calcium silicate (C3S) bio-cement was investigated. CaCl2 salt solution was used as an accelerating liquid for setting and hardening of C3S pastes in comparison with distilled water (DW). Solid state reaction was applied to synthesis C3S phase at elevated temperature followed by rapid cooling. The results showed that 10 wt.% CaCl2 solution was the optimum concentration that showed the lowest setting time (106 min). C3S pastes prepared with CaCl2 solution have better physical and mechanical properties than those mixed with DW even after curing under SBF solution for the different curing ages. However, SBF solution has an adverse effect on the hydrated compound C-S-H that results in a little decrease in strength and hardness values. The elemental analysis emphasized the presence of apatite layer on the surface of the hardened C3S paste. Scanning electron microscopy (SEM) photomicrographs and elemental analysis revealed reliable adaptation of the experimentally prepared C3S paste to the tooth structure, in addition to its bioactivity makes it a consistent material to be used as dentin substitute.

Influence of saline solution on hydration behavior of ß-dicalcium silicate in comparison with biphasic calcium phosphate/hydroxyapatite bio-ceramics.

The influence of using saline solution as mixing and curing liquid on some characteristics of ß-dicalcium silicate (ß-C2S) and biphasic compound tri-calcium phosphate/hydroxyapatite (TCP/HAp) bio-ceramics was investigated. ß-C2S (27-30 nm) was prepared by solid state reaction at 1450°C, while biphasic compound TCP/HAp (7-15 nm) was synthesized from an aqueous solution of Ca(NO3)2·4H2O and (NH4)2HPO4·12H2O by chemical precipitation method. Setting times, compressive strength, pH values, X-ray diffraction analysis, infrared spectroscopy, scanning electron microscopy (SEM) were investigated. The evaluation of cytotoxicity of both calcium silicate and biphasic compounds to human gingival fibroblasts was carried out. The use of saline solution as mixing and immersing liquid shortened the setting time for the two bio-cements. TCP/HAp did not show any mechanical strength but ß-C2S showed good strength values. Both synthesized compounds showed a moderate cytotoxicity and both materials were effective in a no significant way.